Radar sensor RMS-AT-Adj
Reagent for Radar sensor RMS-AT-Adj:
The RMS-AT-Adj radar sensor with adjustable sensitivity serves as a motion detector for approaching objects. It can be mounted directly in the application. The optimum sensitivity can then be set precisely.
Special features are:
- Simple adjustment of the sensitivity at the place of use
- Adjustable switching time for object detection
- Insensitive to lateral movements
- Selection of the measuring range by horizontal or vertical mounting
- Wide input voltage range
- Low power consumption
- Concealed installation possible
- maintenance-free
- Simple assembly
The RMS-AT-Adj radar sensor is used in the following areas in particular:
- Access control
- Gate control
- Person and object recognition
- Motion detection
| Parameter | Value | min. | typ. | max. |
| Operating voltage | 10 VDC | 24 VDC | 30 VDC | |
| Power consumption | 0,5 W | |||
| Temperature range | – 20 °C | 60 °C | ||
| Protection class | IP 67 | |||
| Housing material | PC | |||
| Dimensions | 56 x 46 x 22 mm |
| Parameter | Value | min. | typ. | max. |
| Detection range | 0,5 m | 5,0 m | ||
| Beam angle, horizontal | 80 ° | |||
| Beam angle, vertical | 32 ° | |||
| Frequency | 24 GHz | |||
| Transmission power | 15 dBm EIRP | |||
| Signal output | active low / optocoupler, cascadable | |||
| Connection cable | 5 m LIYY 4 x 0.25 m² | |||
| direction | approximately | |||
| Antenna alignment | 0° | |||
| Status LED | rear side |
| Standard |
| ETSI EN300440-1 V1.3.1 (2001-09) |
| ETSI EN300440-2 V1.1.1 (2001-09 |
| VDE 0848(08/2000) Part1 |
| VDE 0848(01/1991) Part2 |
| ICNIRP Guidelines (04/1998) |
| EN50 081-1 |
| EN50 082-1 |
| Color | Assignment |
| brown | + 24 V DC |
| white | GND |
| green | Output optocoupler – |
| yellow | Output optocoupler + |
Additional information
| Weight | 0,0000 kg |
|---|---|
| Dimensions | 0,0000 × 0,0000 × 0,0000 cm |
